Model: Kinco MT5323T-DP
 |
| MT5323T-DP KINCO |
Thông số kỹ thuật:
Model | MT5323T-DP |
Performance specification | |
Display | 5.7” TFT |
Resolution | 320*240 |
Color | 65536 |
Backlight | 1CCFL |
Brightness | 500cd/m2 |
Backlight life | 50000 hr. |
Touch Panel | 4-wire precision resistance network |
Processor | 32-bit RISC CPU 520MHz |
Memory | 16M FLASH, 32M SDRAM |
Recipe memory & RTC | 512KB & RTC |
Expandable memory | 1 SD Card, 2 U Disks |
Printer port | USB/Serial port |
Ethernet | 10/100 Base-T |
Audio interface | None |
Video interface | None |
Program download | 1 USB SLAVE port/Serial port/Ethernet port |
COM port | COM0:RS232/RS485-2/RS485-4, COM1:RS232/RS485-2/RS485-4, COM2:RS232 |
Expansion port | PROFIBUS-DP |
Electrical specification | |
Rated power | 10w |
Rated voltage | DC24V |
Input range | 12～28VDC |
Momentary power-off | <3ms |
Insulation resistance | Greater than 50MΩ@ 500V DC |
Dielectric strength test | 500 VAC 1 minute |
Structure specification | |
Shell color | Light-grey |
Shell material | ABS |
Dimensions(mm) | 204×150×56.7 mm |
Cutout size(mm) | 192×138mm |
Weight | 0.96kg |
Environment specification | |
Operating temperature | -20～70℃ |
Operating humidity | 10~90% non-condensing |
Storage temperature | -30～80℃ |
Storage humidity | 10~90% non-condensing |
Shockproof test | 10~25Hz (X, Y, Z direction, 2G, 30 minutes) |
Cooling method | Natural air cooling |
Certification | |
Degree of protection | IP65 (front panel) |
CE certification | Comply with EN61000-6-2:2005 and EN61000-6-4:2007standards |
FCC compatibility | Complies with FCC Class A |
Tag: MT5323T-DP Kinco pdf datasheet manual software
1 comments:
The design of the turning tool varies based on the particular application, with tools out there for roughing, finishing, dealing with, threading, CNC machining forming, undercutting, parting, and grooving applications. Milling employs rotating multi-point slicing tools to form the workpiece. Milling tools are either horizontally or vertically oriented and embody end mills, helical mills, and chamfer mills. Close cousins to lathes, CNC spinning lathe machines contain a lathe set with a blank that rotates at excessive speeds whereas a metallic spinning curler shapes the workpiece right into a desired form.
ReplyĐăng nhận xét